CAPITAL GOODS

This sector encompasses manufacturers of machinery and equipment for the production of various goods, such as agricultural implements, motor vehicles, trailers, bodies and other transport equipment. It also includes important subsegments, such as electrical equipment, communications equipment, precision instruments, industrial automation and boilermaking.

In addition to the usual anti-corrosive protection requirements, it is essential to consider aesthetic aspects, such as color, shine and texture, which must be included in the portfolio of paints used.

RELATED PRODUCTS

Search by product name, or if you prefer, use the filter to find the solution that meets your needs. 

Country

Country Filter

Norma

Standard Filter
+ More

Technology

Technology Filter
+ More

Application

Application Filter
+ More

Substrate

Substrate Filter
+ More

Segment

Segment Filter

Alkyd resin-based finishing paint. Good stability and weather resistance. Provides good appearance. Easy to apply due to the product's viscosity, minimizing paint preparation set-up time. Made with organic pigmentation and heavy metal-free driers. Complies with Standard – NBR NM 300-3.

Rezinc EPV 597 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. This coating is curable with humidity in the air and resists temperatures of up to 600°C.

Rezinc EPD 597 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. This coating is curable with humidity in the air and resists temperatures of up to 600°C.

Rezinc ATZ 596 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. It is curable with air humidity and resists temperatures of up to 600°C. The metallic zinc content in the dry film is approximately 88%.

Rezinc ART 596 uses specially selected raw materials in its composition, which provide exceptional anti-corrosive characteristics through cathodic protection. The coating is curable with humidity in the air and has excellent resistance to solvents and high temperatures.

Rekosil FIT 680 Type I uses specially selected raw materials in its composition, developed to indicate overheated areas on external surfaces, resulting from failures in the insulation or in the refractory system. A noticeable change in color indicates the location where the overheating occurred. At temperatures up to 260°C it maintains a deep green color, at 290°C it presents discoloration after 3 weeks, when it reaches 315°C a noticeable change in color after 18 hours and at 400°C it changes to a light color in 3 hours.

Rekosil FIT 680 Type II uses specially selected raw materials in its composition, developed to indicate overheated areas on external surfaces, resulting from failures in the insulation or in the refractory system. A noticeable change in color indicates the location where the overheating occurred. At temperatures up to 180 °C, it maintains a deep blue color, while between 200 and 230 °C it changes to blue-green in 36 to 60 hours. Reaching 260 °C, it changes to a light color in a few hours, becoming white in 24 hours.

Rekosil FAL 680 is a silicone resin-based finish paint pigmented with aluminum, with excellent heat resistance. Therefore, it has thermal curing. To obtain better anti-corrosive performance with this paint, it is recommended to apply it over a zinc silicate primer.

Rekofen FAL 691 uses specially selected raw materials in its composition, which provide excellent impermeability, high light reflection and heat resistance.

Rekotar ARA 231 uses specially selected raw materials in its composition, based on special epoxy coal tar cured with polyamine, which provides excellent chemical resistance, abrasion resistance and high resistance to cathodic protection. It has a high solids content, high thickness, and is an ecological coating with a low content of volatile organic compounds (low VOC).