The engineering and assembly sector includes manufacturers of metal structures, metallurgy, boilermaking, design offices and industrial assembly companies.
These activities are often carried out in consortia, aiming at the construction of industrial buildings, bridges, viaducts and other large works.
Search by product name, or if you prefer, use the filter to find the solution that meets your needs.
Country
Norma
Technology
Application
Substrate
Segment
ACR Non-Ferrous Metals Primer uses specially selected raw materials in its composition, providing a protective film with excellent weather resistance. It is an acrylic primer that promotes adhesion between the finish and surfaces with difficult-to-adhere properties.
Alkyd resin-based finishing paint. Good stability and weather resistance. Provides good appearance. Easy to apply due to the product's viscosity, minimizing paint preparation set-up time. Made with organic pigmentation and heavy metal-free driers. Complies with Standard – NBR NM 300-3.
Rezinc EPV 597 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. This coating is curable with humidity in the air and resists temperatures of up to 600°C.
Rezinc EPD 597 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. This coating is curable with humidity in the air and resists temperatures of up to 600°C.
Rezinc ATZ 596 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. It is curable with air humidity and resists temperatures of up to 600°C. The metallic zinc content in the dry film is approximately 88%.
Rezinc EPV 597 uses specially selected raw materials in its composition, which provide high resistance to abrasion and solvents, with cathodic protection to the system. This coating is curable with humidity in the air and resists temperatures of up to 600°C.
Rekosil FIT 680 Type I uses specially selected raw materials in its composition, developed to indicate overheated areas on external surfaces, resulting from failures in the insulation or in the refractory system. A noticeable change in color indicates the location where the overheating occurred. At temperatures up to 260°C it maintains a deep green color, at 290°C it presents discoloration after 3 weeks, when it reaches 315°C a noticeable change in color after 18 hours and at 400°C it changes to a light color in 3 hours.
Rekosil FAL 680 is a silicone resin-based finish paint pigmented with aluminum, with excellent heat resistance. Therefore, it has thermal curing. To obtain better anti-corrosive performance with this paint, it is recommended to apply it over a zinc silicate primer.
Polidura Epoxy Anticorrosive Primer and Finish uses specially selected raw materials in its composition, which provide good resistance to humidity, high physical and chemical resistance to the system, and can be formulated with pigmentation free of heavy metals.
Polidura Semi-gloss Alkyd Anticorrosive Primer and Finish uses specially selected raw materials in its composition, which provide good resistance to weathering, being completely free of red lead. Product is easy to apply and dries quickly.